Hoyamo and Sinowon Inc
Mission: Your Precision, Our Mission Vision: Green Earth, Transparent Inspection Values: The Inspection Makes a Better World Your Precision Our Mission
Add to Cart
Portable Ultrasonic Durometer SVR-110
SVR-110 Introduction:
● SVR-110 is a special manual portable durometer with manual probe HP-1K by Sinowon group. It applies method of ultrasonic contact impedance to make hardness testing at the spot.
● SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc.
● SVR-110 conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008 and China National standard GB/T 34205-2017.
Features:
● High Accuracy
HV: ±3% HV,HR:±1.5HR, Conform internal standard ASTM A1038, DIN50159.
● Microscopic Indentation
The indention size of SVR-110 is same with HV1 of micro hardness testing in one specimen, it is too small to observe by eyes, it is a non-destructive method for the specimen.
● Quick Measurement
In 2 seconds to get hardness value, working efficiency is 60 times higher than normal bench hardness testers.
Specifications:
| Commodity | Portable Ultrasonic Durometer |
| Model | SVR-110H |
| Code# | 882-110 |
| Testing force | Manual 10N |
| Hardness Range | HV 80-1599; HRC 20-70; |
| Accuracy | ±3% HV; HR: ±1.5HR |
| Measuring Scales | HV/HRC |
| Language | English, Chinese |
| Data Output | RS232 |
| Data Saving | 20-group calibration data, 1000-group measurement data |
| Working Conditions | Temp: -10℃~50℃; Humidity: 30%~80% |
| Power Supply | Rechargeable lithium battery, battery 4.2V, 3200mAh |
| Rechargeable Voltage | AC220V/50Hz, 110V/60Hz |
Ultrasonic Hardness Tester Manual Probe
Features:
Manual Probe Specifications:
| Probe Type | HP-1K | HP-2K | HP-5K | HP-10K |
| Code# | 882-311 | 882-321 | 882-331 | 882-341 |
| Remark | Optional | Standard | Optional | Optional |
| Loading force | 10N | 20N | 50N | 98N |
| Diameter | 21mm | 21mm | 21mm | 21mm |
| Length | 154mm | 154mm | 154mm | 154mm |
| Oscillating Rod Diameter | 2.4mm | 2.4mm | 3mm | 3mm |
| Roughness of measuring surface | Ra<3.2um | Ra<5um | Ra<10um | Ra<15um |
| Min weight of test material | 0.3kg | 0.3kg | 0.3kg | 0.3kg |
| Min thickness of test material | 2mm | 2mm | 2mm | 2mm |